These MOSFETs are some of those most compact and convenient MOSFETs available. They can be mounted standalone or directly to the deans connectors to make locating them as simple as possible. Also very important is unlike some of the cheaper fets on the market these still include the super high power TVS diodes that protect them from voltage spikes that come from the high power loads of the motor.
MOSFETs serve two main purposes in airsoft guns. One is to take the load off the trigger contacts and use a solid state ultra powerful MOSFET to switch power to the motor instead. This means that the trigger contacts will no longer wear as they are only seeing a very small amount of current. Besides not wearing out trigger contacts a MosFET will often increase rate of fire due to the lower resistance of the FET and new wire. The MicroFET has been designed with ultra low resistance in mind to maximize the power increase to the motor and increase ROF. Using a MOSFET is very important if you're using high powered batteries like 11.1V Lipo or high discharge 7.4V LiPos as without one your trigger contacts will very quickly be worn away by the high current arcs.
Install instructions: http://sparklabs.si/wp-content/uploads/2018/02/microFET-manual-v0.3.pdf
Specifications:
Max Recommended Battery Voltage: 4S Lipo
Resistance: 1.0 - 1.2 MilliOhm
PCB Based
This product was added to our catalog on Tuesday 04 August, 2020.
Your cart is empty